MACHINE LENGHT 5.7 METERS FROM DOOR TO DOOR. IT HAS COMPUTER CONTROL PANEL AND 9 UNITS. WORKING SPEED IS 9 - 18 METER/MINUTE.
AIR COMPRESOR WITH AIR DRYER, DUST SUCTION MACHINE AND REGULATOR MUST BE USED FOR MACHINE. START-UP, INSTALLATION AND MAINTENANCE SHOULD BE DONE FROM UNVER WOODWORKING MACHINERY QUALIFIED TECHNICIANS. IF YOU DONT OBEY CONDITIONS, YOUR MACHINE LIFESPAN WILL SHORTEN. IT WILL NOT INCLUDED WARRANTY.
Use fastly with Pc controlling unit. Pratical and easy to use. Reach all past defect.You can learn total material and pvc band length.
2,2 kw, 8000 rpm 2 powerful motors pre-milling to 2 mm. Milling cutters can calibrated without unpick. All excelsiors absorbed by dust suction.
Milling pre-surfaces can heating infrared and drying. It prevents from wetness. Prepeares glue stick surface appropriately.
4 liter glue capacity, ready 5-15 minutes. Stiffened and annealed glue roller.Preview glue stcik system. 4 kh bearing, back spring concept.
Press roller is adjusted by pressure, it rotates same as a palet speed. There are 3 press roller which is pressure adjusted. Press platform’s back and forward movement calibrated by indicator easily.
45° angled, pair of linear sled beginning-end milling unit. At 1200 rpm, it cuts beginning-end sensitively with high frequency motors.
At 18000 rpm, pair of motor and four dynamic pneumatic automation systems. Tirim milling system, can choose parpendicular cornered, postforming or cover profils. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily.
At 18000 rpm, pair of motor and four dynamic pneumatic automation systems. Tirim milling system, can choose parpendicular cornered, postforming or cover profils. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily.
Using preview disk bright surfaces can scraping with radius. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily
2,2 kw, 8000 rpm motor. Opens 4 – 12 mm canal. All excelsiors absorbed by dust absortion.
1) TECHNICAL INFORMATIONS |
BANTMATİK 579 TR-PC |
2) MAXIMUM PANEL THICKNESS |
8 MM / 60 MM. |
3) BAND THICKNESS |
0,4 MM / 3 MM. |
4) MINIMUM PANEL LENGTH |
120 MM |
5) MINIMUM PANEL WIDTH |
100 MM |
6) GLUE CAPACITY |
3 LT / 4 KG. |
7) GLUE HEATING TIME |
20-25 MINUTE |
8) WORKING SPEED |
9/18 M / MIN |
9) FRONT MILLING CUTTER MOTORS 10) (2 PIECES) |
2,2 KW 12.000 R.P.M |
11) END MILLING CUTTER MOTORS (2 PIECES) |
0,37 KW 12.000 R.P.M |
12) BOTTOM-TOP MILLING CUTTER MOTORS (2 PIECES) |
0,55 KW 18.000 R.P.M |
13) TRIM MILLING CUTTER MOTORS (2 PIECES) |
0,55 KW 18.000 R.P.M |
14) BUFFER MOTORS (2 PIECES) |
0,25 KW / 3.000 R.P.M |
15) GROVING MOTOR |
4 KW TRF /12.000 R.P.M |
16) POWER |
19 KW |
17) VOLTAGE |
380 – 400 V / 50–60 HZ |
18) CURRENT |
50 AMPER |
19) WORKING PRESSURE |
4/6 BAR |
20) TRANSPORTATION DIMENSIONS LENGHT - WIDTH - HEIGHT |
6.6 X 0.85 X 1.5 M |
21) WEIGHT |
2.200 ± 50 KG |