Ünver Makina
Products - Edge Banding Machines - BANTMATİK 436 EDGE BANDING MACHINE
Detail Technical Informations Settlement plan Catalog

MACHINE LENGHT 4,3 METERS FROM DOOR TO DOOR. IT HAS PLC CONTROL PANEL AND 6 UNITS. WORKING SPEED IS 15 METER/MINUTE.

 

AIR COMPRESOR WITH AIR DRYER, DUST SUCTION MACHINE AND REGULATOR MUST BE USED FOR MACHINE. START-UP, INSTALLATION AND MAINTENANCE SHOULD BE DONE FROM UNVER WOODWORKING MACHINERY QUALIFIED TECHNICIANS. IF YOU DONT OBEY CONDITIONS, YOUR MACHINE LIFESPAN WILL SHORTEN. IT WILL NOT INCLUDED WARRANTY.

PANEL BOARD

Use fastly with Panel Board. Pratical and easy to use. Reach all past defect.You can learn total material and pvc band length.

PRE MILLING

2,2 kw, 8000 rpm 2 powerful motors pre-milling to 2 mm. Milling cutters can calibrated without unpick. All excelsiors absorbed by dust suction.

INFRARED HEATING

Milling pre-surfaces can heating infrared and drying. It prevents from wetness. Prepeares glue stick surface appropriately.

GLUE UNIT

4 liter glue capacity, ready 5-15 minutes. Stiffened and annealed glue roller.Preview glue stcik system. 4 kh bearing, back spring concept.

PRESS UNIT

Press roller is adjusted by pressure, it rotates same as a palet speed. There are 3 press roller which is pressure adjusted. Press platform’s back and forward movement calibrated by indicator easily.

BEGINNING END CUTTING

45° angled, pair of linear sled beginning-end milling unit. At 12.000 rpm, it cuts beginning-end sensitively with high frequency motors.

BOTTOM TOP MILLING

It can cut till 30°, using preview disk bright surfaces can milling without scratch.at 18000 rpm sensitive surfaces can milling with high frequency motors. Band thickness can control 0,4 - 3 mm accurately by indicator. All excelsiors absorbed by dust suction.

R2 SCRAPING

Using preview disk bright surfaces can scraping with radius. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily

BUFFER UNIT

15 angled, forward-back and down-up polishing motors obtain clean and bright surfaces.

DUST SUCTION

1600 m3 dust suction fan absorb all pvc excelsiors from pre-milling and bottom-top milling.

TAPPING PALLET M5 thread connected on the 1” strong bridged chain, tapping palet and bearing top wheels, bright materials processing without scratch
OPTIONAL TOUCHABLE CONTROL PANEL
REAR SIDE

TECHNICAL INFORMATIONS

BANTMATİK 436 TR-PC

1)       MAXIMUM PANEL THICKNESS

8 MM / 60 MM.

2)       BAND THICKNESS

0,4 MM / 5 MM.

3)       MINIMUM PANEL LENGTH

120 MM

4)       MINIMUM PANEL WIDTH

100 MM

5)       GLUE CAPACITY

3 LT / 4 KG.

6)       GLUE HEATING TIME

20-25 MINUTE

7)       WORKING SPEED

15 M/MIN

8)       FRONT MILLING CUTTER MOTORS (2 PIECES)

2,2 KW 12.000 R.P.M

9)       END MILLING CUTTER MOTORS (2 PIECES)

0,37 KW 12.000 R.P.M

10)   BOTTOM-TOP MILLING CUTTER MOTORS (2 PIECES)

0,55 KW 18.000 R.P.M

11)   BUFFER MOTORS (2 PIECES)

0,25 KW / 3.000 R.P.M

12)   DUST SUCTION MOTOR

1,5 KW 1.600 M3

13)   POWER

12 KW

14)   VOLTAGE

380 – 400 V / 50–60 HZ

15)   CURRENT

32 AMPER

16)   WORKING PRESSURE

4/6 BAR

17)   TRANSPORTATION DIMENSIONS

18)   LENGHT - WIDTH - HEIGHT

5.2 X 0.75 X 1.5 M

19)   WEIGHT

1.650 ± 30 KG