Ünver Makina
Products - Edge Banding Machines - BANTMATİK 589 EDGE BANDING MACHINE
Detail Technical Informations Settlement plan Catalog

MACHINE LENGHT 5.8 METERS FROM DOOR TO DOOR. IT HAS COMPUTER CONTROL PANEL AND 9 UNITS. WORKING SPEED IS 9 - 18 METER/MINUTE. UPPER PRESS IS AUTOMATIC FROM COMPUTER. AUTOMATIC PASSING SYSTEM WITH PNEUMATIC REGULATIONS FOR BOTTOM TOP MILLING AND R2 SCRAPING UNIT.

 

AIR COMPRESOR WITH AIR DRYER, DUST SUCTION MACHINE AND REGULATOR MUST BE USED FOR MACHINE. START-UP, INSTALLATION AND MAINTENANCE SHOULD BE DONE FROM UNVER WOODWORKING MACHINERY QUALIFIED TECHNICIANS. IF YOU DONT OBEY CONDITIONS, YOUR MACHINE LIFESPAN WILL SHORTEN. IT WILL NOT INCLUDED WARRANTY.

PC CONTROL UNIT Use fastly with Pc controlling unit. Pratical and easy to use. Reach all past defect.You can learn total material and pvc band length.
PRE-MILLING 2,2 kw, 8000 rpm 2 powerful motors pre-milling to 2 mm. Milling cutters can calibrated without unpick. All excelsiors absorbed by dust suction.
INFRARED HEATING Milling pre-surfaces can heating infrared and drying. It prevents from wetness. Prepeares glue stick surface appropriately.
GLUE UNIT 4 liter glue capacity, ready 5-15 minutes. Stiffened and annealed glue roller.Preview glue stcik system. 4 kh bearing, back spring concept.
PRESS UNIT Press roller is adjusted by pressure, it rotates same as a palet speed. There are 3 press roller which is pressure adjusted. Press platform’s back and forward movement calibrated by indicator easily.
BEGINNING-END MILLING 45° angled, pair of linear sled beginning-end milling unit. At 1200 rpm, it cuts beginning-end sensitively with high frequency motors.
BOTTOM-TOP MILLING

It can cut till 30°, using preview disk bright surfaces can milling without scratch.at 18000 rpm sensitive surfaces can milling with high frequency motors. Band thickness can control 0,4 - 3 mm accurately by indicator. All excelsiors absorbed by dust suction.

CORNER ROUNDING

At 18000 rpm, pair of motor and four dynamic pneumatic automation systems. Tirim milling system, can choose parpendicular cornered, postforming or cover profils. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily.

R2 RADIUS Using preview disk bright surfaces can scraping with radius. 0,4 - 3 mm band thickness adjustment calibrated by indicator easily
GROOVING UNIT

2,2 kw, 8000 rpm motor. Opens 4 – 12 mm canal. All excelsiors absorbed by dust absortion.

CLEANING LIQUID

Glue remnants occur near the band edge. Glue remnant cleaning easily with solvent.

POLISHING UNIT 15 angled, forward-back and down-up polishing motors obtain clean and bright surfaces.
HOT AIR Mat surfaces crystallizing with hot air nozzle. Thus materials reach natural appearance
TAPPING PALLET M5 thread connected on the 1” strong bridged chain, tapping palet and bearing top wheels, bright materials processing without scratch
GROOVING OPTIONS

1)       TECHNICAL INFORMATIONS

BANTMATİK 589 TR-PC

2)       MAXIMUM PANEL THICKNESS

8 MM / 60 MM.

3)       BAND THICKNESS

0,4 MM / 3 MM.

4)       MINIMUM PANEL LENGTH

120 MM

5)       MINIMUM PANEL WIDTH

100 MM

6)       GLUE CAPACITY

3 LT / 4 KG.

7)       GLUE HEATING TIME

20-25 MINUTE

8)       WORKING SPEED

9/18 M / MIN

9)       FRONT MILLING CUTTER MOTORS

10)   (2 PIECES)

2,2 KW 12.000  R.P.M

11)   END MILLING CUTTER MOTORS (2 PIECES)

0,37 KW 12.000 R.P.M

12)   BOTTOM-TOP MILLING CUTTER MOTORS (2 PIECES)

0,55 KW 18.000 R.P.M

13)   TRIM  MILLING CUTTER MOTORS (2 PIECES)

0,55 KW 18.000 R.P.M

14)   BUFFER MOTORS (2 PIECES)

0,25 KW / 3.000 R.P.M

15)   GROVING MOTOR

4 KW TRF /12.000 R.P.M

16)   POWER

20 KW

17)   VOLTAGE

380 – 400 V / 50–60 HZ

18)   CURRENT

50 AMPER

19)   WORKING PRESSURE

4/6 BAR

20)   TRANSPORTATION DIMENSIONS LENGHT - WIDTH - HEIGHT

6.7 X 0.85 X 1.5 M

21)   WEIGHT

2.300 ± 50 KG