Ünver Makina
Products - Edge Banding Machines - EKOBANT 336 EDGE BANDING MACHINE
Detail Technical Informations Settlement plan Catalog

MACHINE LENGHT 3,3 METERS. IT HAS PLC CONTROL PANEL AND 6 UNITS.

WORKING SPEED IS 12 METER/MINUTE.


AIR COMPRESOR WITH AIR DRYER, DUST SUCTION MACHINE AND REGULATOR MUST BE USED FOR MACHINE. START-UP, INSTALLATION AND MAINTENANCE SHOULD BE DONE FROM UNVER WOODWORKING MACHINERY QUALIFIED TECHNICIANS. IF YOU DONT OBEY CONDITIONS, YOUR MACHINE LIFESPAN WILL SHORTEN. IT WILL NOT INCLUDED WARRANTY.

Control Unit

Working speed 12 meter/ minute

Pre-milling

2 pieces 2,2 Kw 12000 rpm powerful motors cuts to 2 mm. Dust suction unit absorbs all shavings.

Infrared Heating

Front surfaces heating and frying. Prepeares glue stick propley.

Glue Tank

4 liter glue capacity, ready 5-15 minutes. Stiffened and annealed glue roller.?

Beginning End Milling

At 1800 rpm with 2 motors and 2 pistons rounding corners and bottom surface. 0,4 - 3 mm band thickness calibrated by sensetively indicator easly

Bottom Top Milling

Surface milling sensitively with high frequency motors at 18000 rpm 0,4-3 mmband thickness calibrated by sensitively indicator

Scraping

Scraping 0,4-3 mm band thickness calibrated by sensitively indicator

Buffing Unit

Clean and bright surface obtained by 15° angled buffer motors

Dust Suction

1200 m3 dust suction fan absorb all pvc excelsiors from bottom-top milling.

TECHNICAL INFORMATIONS

EKOBANT 336

MAXIMUM PANEL THICKNESS

8 MM / 60 MM.

BAND THICKNESS

0,4 MM / 5 MM.

MINIMUM PANEL LENGTH

120 MM

MINIMUM PANEL WIDTH

100 MM

GLUE CAPACITY

4 LT / 5 KG.

GLUE HEATING TIME

25-30 MINUTE

WORKING SPEED

12 M/MIN

FRONT MILLING CUTTER MOTORS (2 PIECES)

2,2 KW 12.000 R.P.M

 END MILLING CUTTER MOTORS (2 PIECES)

0,37 KW 12.000 R.P.M

BOTTOM-TOP MILLING CUTTER MOTORS (2 PIECES)

0,55 KW 18.000 R.P.M

BUFFER MOTORS (2 PIECES)

0,25 KW / 3.000 R.P.M

DUST SUCTION MOTOR

1,5 kW - 1.600 M3/H

POWER

12 Kw

VOLTAGE

380 – 400 V / 50–60 HZ

CURRENT

32 A

WORKING PRESSURE

4/6 BAR

TRANSPORTATION DIMENSIONS LENGHT - WIDTH - HEIGHT

4.2 X 0.75 X 1.5 M

WEIGHT

1.320 ± 35 KG